Skip to content
OperatorCompliance
Free trial
← All articles

· 12 min read

PG9 defects that can stop a vehicle at the roadside

A practical guide to PG9 defects, roadside prohibitions and the vehicle faults most likely to stop UK operators from moving on.

PG9 defects that can stop a vehicle at the roadside

A PG9 is a prohibition notice issued by DVSA when a vehicle or trailer has a defect serious enough to affect road safety or roadworthiness. In practical terms, it can stop a vehicle at the roadside there and then, or allow limited time to put the fault right before the prohibition takes effect. For operators, that means lost journeys, missed delivery or service commitments, compliance risk, and a record that can matter if DVSA or the Traffic Commissioner later reviews maintenance standards.

Many people search for a list of PG9 defects as if there were one short checklist that covers every case. There is useful guidance, but roadside decisions are not made from a single neat list. DVSA examiners look at the defect itself, how serious it is, whether several faults together make the vehicle unsafe, and whether it can be moved without danger.

What a PG9 means in practice

A PG9 is the form used by DVSA to prohibit the use of an unroadworthy vehicle or trailer. It can be issued by a DVSA vehicle examiner at the roadside, at operator premises, or during other enforcement activity. In some cases the police may also be involved in the stop, but the prohibition itself is a DVSA roadworthiness action.

For UK goods vehicle and PSV operators, the important distinction is between an immediate prohibition and a delayed prohibition.

An immediate prohibition means the vehicle must not be used on the road because the defect presents an immediate risk. That can mean the vehicle is immobilised at the roadside, or it can only be moved under tightly controlled conditions, for example directly to a place of repair if specifically allowed. If the defect affects a trailer, the trailer may be prohibited even if the drawing vehicle is otherwise roadworthy.

A delayed prohibition means the defect is serious enough to justify formal action, but not so dangerous that the vehicle has to stop immediately. DVSA sets a date and time when the prohibition comes into force. That gives the operator a short window to complete repairs before the vehicle becomes prohibited from use on the road.

For operators, a PG9 is not just a repair issue. It is also evidence about maintenance control. If a vehicle reaches the roadside with a serious defect, DVSA may ask how it passed the driver walkaround check, when it was last inspected, whether defects were reported, and what the rectification process looks like. That is why we build Operator Compliance around the records transport managers actually need to produce, including inspection scheduling, defect history, signed evidence and due dates. You can see the sort of vehicle and driver compliance tracking tools we use to keep those records in one place.

Is there an official list of PG9 defects?

Not in the sense most operators mean when they ask for one. There is no single definitive public document headed “the list of PG9 defects” that guarantees a prohibition in every case.

What DVSA does have is a set of inspection standards and prohibition guidance used by examiners. Those standards cover the condition and operation of brakes, steering, tyres, suspension, lights, chassis and body, view of the road, load security and other roadworthiness items. The examiner applies those standards to the vehicle in front of them.

That matters because the same type of defect can lead to different outcomes depending on severity. A minor issue may lead to advice or a defect notice. A more significant issue may justify a delayed prohibition. A dangerous defect may justify an immediate PG9. The decision is based on condition, extent, and risk, not just on the label of the fault.

This is also why operators should be careful with online summaries that present a fixed list. They can be useful prompts, but they are not a substitute for the DVSA inspection manual, the Guide to Maintaining Roadworthiness, and a maintenance system that shows defects were identified and repaired promptly.

For UK operators, the practical point is this. Do not rely on whether a specific item appears on somebody’s list. Focus on whether the defect would make the vehicle fail a proper safety inspection, fail an MOT or annual-test, or create a danger if found at the roadside. In many cases, that is exactly how a DVSA examiner will view it.

The defects most likely to lead to a PG9

Certain categories come up repeatedly because they go directly to road safety. If you are trying to understand the kind of defects that most often lead to prohibition action, these are the areas to watch most closely.

First, brakes. Serious brake defects are among the clearest routes to an immediate PG9. Examples include insufficient braking effort, significant imbalance, inoperative components, air leaks, damaged brake pipes or hoses, contaminated linings, seized brakes, or warning system faults that indicate the braking system cannot be relied on. If a vehicle shows clear signs that braking performance is compromised, the roadside outcome is unlikely to be generous.

Second, tyres. Exposed cords, cuts deep enough to reach the ply, bulges, serious sidewall damage, illegal tread depth, or tyres of an unsuitable type or condition can all lead to prohibition. On heavy vehicles and trailers, tyre condition is an obvious and easily checked item, which is why missed tyre defects often raise difficult questions about walkaround checks.

Third, steering. Excessive play, insecure steering components, damaged linkages, leaks or faults affecting power steering operation, or any condition that means the driver cannot steer accurately can justify a PG9 very quickly. Steering defects are treated seriously because failure is catastrophic.

Fourth, suspension. Broken leaves, fractured springs, insecure mountings, badly worn components, defective airbags, or damage that affects axle location and stability can all move a defect from routine repair into prohibition territory.

Fifth, lights and electrical safety items. Not every lamp fault will stop a vehicle, but if the defect affects safe use, especially in poor visibility or at night, the risk rises. Multiple lighting failures, inoperative stop lamps, direction indicators not working, or wiring defects creating a fire or safety risk can all attract stronger action.

Sixth, load security. This is a major roadside issue. A load that is unstable, badly restrained, at risk of shifting, or likely to fall from the vehicle can result in immediate prohibition. For operators carrying mixed freight, plant, steel, pallets, waste, parcels or abnormal shapes, load security needs the same discipline as mechanical maintenance.

Seventh, body condition and structural integrity. Serious corrosion, insecure bodywork, damaged floors, defective tail lifts, loose doors, insecure panels, or any condition that means the body cannot safely contain the load or protect other road users may justify a PG9. On PSVs, defects affecting passenger safety are especially sensitive.

Eighth, driver-view issues. A driver must have a clear view of the road. Cracked or damaged glass in the swept area, failed wipers, ineffective washers, mirror defects, or anything obstructing vision can become a prohibition issue, particularly in bad weather. This category is often underestimated because each item can look small in isolation, but the roadside test is whether the vehicle can be used safely.

These are the areas most operators have in mind when they ask for a list of PG9 defects. The better way to think about it is as a list of defect groups where a poor decision to keep running is most likely to end with a prohibition.

How DVSA decides whether a defect is serious enough

DVSA does not assess defects in a vacuum. Examiners look at the real risk created by the condition they find.

The first question is danger. Does the defect create an immediate risk to the driver, passengers, the load, or other road users? If yes, an immediate prohibition becomes much more likely.

The second is extent. A minor leak is not the same as a major leak. Slight wear is not the same as a component on the point of failure. A single lamp out is not the same as a vehicle that is effectively not visible. Severity matters.

The third is accumulation. Several defects that might each look less serious on their own can justify a stronger response when taken together. A tyre issue, poor lights, and a visibility defect on the same vehicle tell a different story from one isolated fault.

The fourth is evidence of maintenance control. If the vehicle condition suggests defects have been present for some time, DVSA may infer poor inspection quality or poor rectification control. A roadside prohibition can then become part of a bigger operator compliance discussion.

The fifth is whether the vehicle can be moved safely. Even where a defect is serious, the examiner will consider whether any movement is possible without creating danger. That affects whether the prohibition is immediate, what conditions apply, and whether recovery or mobile repair is needed.

For UK operators, this sits within the operator licensing system. A PG9 can feed into wider action if it points to weak systems, poor maintenance planning, or ineffective driver defect reporting. That is why transport managers should be able to show inspection intervals, completed repair records, sign-off, and a clear audit trail. If you need one place to hold that evidence and manage due dates, our operator licence compliance system comparison sets out how we handle those records in practice.

What operators should do after a PG9

The first step is simple. Treat the vehicle or trailer as out of service immediately, unless the terms of the prohibition specifically allow limited movement. Mark it VOR and make sure traffic office, workshop and the responsible manager all know it must not be allocated.

Next, obtain and review the prohibition details carefully. Confirm whether it is immediate or delayed, which defects are listed, what movement is permitted, and what evidence may be needed to clear it. Do not rely on verbal summaries from the driver alone. Get the actual notice and keep a copy on file.

Then arrange repair properly. That means diagnosing the listed defects, checking for associated faults, and using a competent fitter or workshop. A common mistake is fixing only the exact item named on the PG9 and missing the underlying issue. If a tyre was prohibited because of abnormal wear, for example, look at alignment, suspension and inflation control as well.

Record everything. Keep the prohibition notice, workshop job card, parts used, inspection sheets, fitter sign-off, photographs if useful, and any communication with DVSA. If the defect should have been identified at the walkaround check or safety inspection, investigate why it was missed and document the corrective action. That record matters if the case later reaches the Traffic Commissioner.

You should also review whether any similar vehicles or trailers in the fleet need immediate checks. A prohibited brake chamber, repeated wheel security issue, or recurring load restraint failure may point to a wider fleet problem rather than a one-off event.

Before return to service, make sure the vehicle has passed whatever verification is required. Depending on the defect and the prohibition terms, that may mean workshop confirmation, an additional inspection, or a formal release process. The key point is that the vehicle goes back into use only when the prohibition has been properly dealt with, not because the traffic pressure is high.

How to reduce the risk of PG9 defects appearing at the roadside

The best control is still the boring one, done well every day. Drivers need structured walkaround checks, with enough time to do them properly and a clear process for reporting defects before departure. That means not just telling drivers to “check the vehicle”, but giving them a defect checklist that covers tyres, wheels, lights, mirrors, glass, wipers, leaks, load security, body condition, coupling, brake warnings and anything specific to the vehicle type.

Safety inspections need to be planned to the correct frequency for the vehicle, operation and usage. The interval should reflect the Guide to Maintaining Roadworthiness and the actual risk profile of the fleet. A vehicle on hard urban multi-drop work may need a different approach from one on lighter trunking. Whatever interval you set, keep evidence that inspections happened on time and defects were rectified.

Defect reporting must lead to rectification control. Too many compliance failures happen not because a defect was never seen, but because it was reported, deferred informally, and then forgotten. We built Operator Compliance so defects, inspections, MOT and annual-test dates, driver records and signed evidence are not scattered across paper, messages and spreadsheets. If you want to discuss how that fits your operation, you can speak to us about your compliance process.

Driver training matters as well. Drivers should know what a dangerous defect looks like, when a vehicle must not be moved, and how to escalate concerns if they are under delivery pressure. For PSV, taxi and private hire, and van fleets as well as HGV operators, the principle is the same. No commercial urgency justifies taking an unsafe vehicle onto the road.

Keep your records ready for scrutiny. That includes walkaround checks, safety inspections, brake test results where applicable, repair invoices, fitter reports, MOT and annual-test outcomes, tachograph analysis, driver licence checks with DVLA, Driver CPC status, DQC validity where relevant, and insurance evidence. If you are checking vehicle insurance externally, tools such as askMID are part of the picture, noting that askMID sits within the framework of the Motor Insurers' Bureau, also known as MIB. None of that replaces maintenance, but it does show broader control.

For businesses integrating systems, it also helps when compliance data is not trapped in one place. Some operators want links to workshop software, telematics, payroll, or reporting tools through a REST API or webhooks. Others need data feeds into platforms such as Fleetalyse or Logivo.AI. The exact setup varies, but the compliance objective is consistent, one reliable record for the operator licence file, including dates, actions and sign-off.

Finally, remember that a roadside prohibition is rarely just about the defect found on the day. It is about whether your systems would satisfy DVSA and, if necessary, the Traffic Commissioner. If your records are complete, your inspections are on time, your defects are closed out properly, and your drivers know what good looks like, the risk of a PG9 drops sharply. That is the standard we work to ourselves at Fleeta Limited, and it is why OperatorCompliance is built around the same practical controls operators are expected to demonstrate on the road and in the office.

What is a PG9 prohibition?

A PG9 is a DVSA prohibition notice used when a vehicle or trailer has defects serious enough to affect roadworthiness or safety. It can stop use immediately or after a short delay.

Can a minor defect lead to a PG9?

Usually not on its own, but several smaller defects together can show poor roadworthiness control. DVSA will look at the overall condition and whether the vehicle is safe to continue.

Do trailers get PG9 prohibitions as well?

Yes. Trailers can be prohibited for defects such as tyres, brakes, lights, structural condition or load security issues, just as powered vehicles can.

Is a PG9 the same as a fixed penalty?

No. A PG9 is a prohibition on using the vehicle because of defects. A fixed penalty is a separate enforcement action and may be issued alongside other action where appropriate.

How is an immediate prohibition different from a delayed one?

An immediate prohibition means the vehicle must not continue in service until the defect is put right. A delayed prohibition allows limited time before the prohibition takes effect.

Why do maintenance records matter after a PG9?

Records help show whether the defect was isolated or part of a wider maintenance failure. They may be important if the case later affects operator-licence compliance or Traffic Commissioner scrutiny.

Ready to stop chasing dates?

Set up in an afternoon. Keep your operator licence clean for good.

14-day free trial · no card · cancel anytime